Showing posts with label precision cooker. Show all posts
Showing posts with label precision cooker. Show all posts

Tuesday, May 26, 2015

Memorial Day: Purple Potato Salad Sous Vide

The side dish I decided to make this Memorial Day was a warm potato salad, but I didn't want to go for a standard German potato salad.  For the potatoes I picked up a bag of small purple potatoes at the supermarket, no reason, they were just on sale.

I usually have a water bath set up in the kitchen, but sice this was going to be a pretty hot bath I put a couple of sisal fiber placemats under the Cambro to protect the granite countertop.  I set the circulator to 90C and turned it on.

The potatoes were cut in to bite sized pieces and tossed with olive oil, salt, pepper and granulated onion.  I smashed four garlic cloves and threw them in as well.  Everything was put in to a Foodsaver bag along with 2 tbs butter and vacuum sealed, then the pouch was placed in the still heating bath.  In order to allow the bath to heat up as quickly as possible a blanket was wrapped around the bath and dish towels laid over the top.  Once the bath hit 90C a timer was set for 30 minutes.  When the timer went off the pouch was retreived from the bath, cut open, and the potatoes were dumped in a colander placed over a bowl.  A vinaigrette was made by whisking the liquid drained from the potatoes with 2-3 Tb honey dijon mustard, about 1/4 cup olive oil and around 2 Tb white wine vinegar until an emulsion was formed, which was then tossed with the still hot potatoes.  Thinly sliced onion, diced Anaheim pepper, capers, chives and a little cilantro were folded in and the potato salad was covered and allowed to sit for 30 minutes for the flavors to marry.

This potato salad turned out really well, the potatoes were tender but not to the point of falling apart and because they were mixed with the vinegraitte when they were still hot they absorbed a lot of flavor.  By cooking the potatoes sous vide and incorporating the bag liquid in the vinegraitte all the potato flavor stayed where it belonged.  I'll be adding this recipe to the summer holiday rotation.

Monday, December 29, 2014

Faux-aged, Searzall seared, sous vide cooked standing rib roast (with mushroom/black garlic gravy).

We have traditions.  For Fourth of July we have a cook out, Thanksgiving is a traditional turkey dinner with all the trimmings and Christmas we have a standing rib roast with dauphinoise potatoes, fresh yeast rolls and a few rotating vegetables.  This Christmas was no different, but earlier in the year I had read about a technique for taking wet-aged beef from the supermarket and imparting the flavors of a dry aged cut of meat and I wanted to try it out.

I believe this process was originally described in one of the Modernist Cuisine books (at home?) but I first read about it on the Seriouseats blog.  The process takes some time, so 8 days before Christmas I went to our local supermarket (Jewel-Osco) and picked up a 2 bone rib roast.  After looking at what was available I picked one that was a good mix of lean muscle to fat, I would describe it as solidly in the choice grade.  Once at home I started the process.

The first step in the faux-aging process is to coat the cut of beef with fish sauce, vacuum seal and let it sit in the refrigerator for 3-4 days.  I grabbed a bottle of Tiparo's Fish Sauce from the pantry and tried to coat every surface of the roast, then let it sit in the run-off for a few minuted while I cut and prepared a suitably large Foodsaver bag.  The roast was just small enough to fit in the bag, which was then vacuum sealed and left in the refrigerator for four days.

The next step is to remove the roast from the bag and let it sit in the refrigerator loosely covered for a few days to allow moisture to evaporate from the meat.  The way I saw it described (which was for steaks instead of roasts) was to wrap the meat in a few layers of cheesecloth, but since I didn't have any of that laying around I just draped a couple of sheets of parchment paper of the roast and covered the whole thing with a dish towel.  Before covering I had coated the exposed meat with cracked black pepper.  This was left in the refrigerator for 3 more days.


This was the roast after three days dehydrating in the refrigerator, as you can see the fat cap had turned a bit yellowish/brown and there were some dark areas on the exposed muscle.  The next step was to trim the roast of most of the fat cap and any discolored meat.  Before starting, I set my new Anova Precision Cooker up on a 12 quart Cambro, filled it to a few inched above the minimum and started heating the bath to 132f.


I then went about trimming the roast, all the scraps were saved so I could render them down later and use the fat for other parts of the meal.  Once trimmed the roast was seasoned with salt and pepper, and I broke out the Searzall to sear all the surfaces.  There are several schools of thoughts when it comes to searing sous vide cooked meats.  I like to sear before AND after the soak.  The initial sear not only serves to kill off any surface bacteria that might be present, but the Maillard reactions that occur during the sear will have a chance to permeate the meat during the soak.  The second searing lets you develop a good crust on the meat.  The seared roast was again vacuum sealed using the Foodsaver and the bag placed in the water bath.  I added water to bring the bath up to near the max level and left it to soak for about 5 hours.





Here is the bagged roast soaking in the water bath.  Initially the temperature went down about 10 degrees when the roast was added and the water level topped off, but the circulator rebounded quickly and the bath temperature was back up where I wanted it within 10 minutes.



After 5 hours it was time to remove the roast from the bath.  This was the day before Christmas, so the roast was chilled in an ice bath and set in the refrigerator until the next day.  For serving I simply rethermed the roast in a 130f bath for about an hour, then removed from the bag, patted dry and allowed to rest for about 10 minutes before placing in a very hot oven (500f) for about 10 minutes to dry off the outer surface and develop a nice crust.

To serve with the roast I made a quick mushroom/black garlic gravy.  I've been playing around with black garlic a bit lately and wanted to find a way to incorporate it in the the meal.  Shallots and mushrooms were browned in some of the fat rendered from the beef trimmings, once suitably colored a bit of flour was added to form a roux.  The roux was cooked for a few minutes to get rid of the raw flour taste, minced black garlic was added and the pan was deglazed with some red wine.  Beef broth was added and the gravy was left to reduce and thicken on the stove top.

So was it worth it?  The resulting roast had some of the flavors you expect to find in dry-aged beef, but at a fraction of the cost.  Real dry aged beef will have more concentrated and complex flavors, but if you don't want to pay 5 times as much this technique will give you a good result somewhere between a wet aged roast and its much more expensive dry aged cousin.  

Thursday, November 20, 2014

It's Here!: Anova Precision Cooker Edition

I've heard good things about the Anova immersion circulator so when I heard that they had started a Kickstarted campaign for a second generation of their circulator I jumped on board.  Since I got in so early, I was able to get one at the "Founder's Club" level for $99 and yesterday it finally arrived!


And here it is!  The packaging is very good looking, a cylinger about 5" in diameter and 25" long with a yellow cap and black body emblazoned with their logo.  Once you twist off the cap you'll find the circulator nestled in the package with some foam rings and caps.  Everything about the packaging seems to be well thought out and should provide a great deal of protection for the circulator when I'm taking it on the road with me.














Here is everything removed from the packaging.  The circulator is quite a bit larger than my Nomiku but looks good and has a really nice, bright, large display.  There is no manual included in the box so I highly suggest downloading it from the Anova Culinary website.  The controls are somewhat intuitive but there are a few things that may not be so obvious, such as how to switch from farenheit to celcius.  The clamp attaches to the cooking vessel and allows you to easily adjust the height of the circulator so you can use smaller pots.  There are minimum and maximum water levels marked on the stainless steel sleeve of the circulator, however I did see some issues with the measurement of temperature when running towards the minimum water level mark.





Here is the circulator mounted to a 12 quart Cambro.  If you look closely you can see the MAX water level mark, there is also a small indentation in the stainless steel sleeve at this level.  In the picture to the left I had filled the Cambro to the 8 quart (7.57 liter) mark with cold tap water, normally I would fill the bath with hot tap water but I wanted to see how quickly the new Anova would heat it up.  First I filled the container to the 8 quart mark and attached my Nomiku to see how much it would heat the bath in 15 minutes, then I dumped the container, refilled it with cold tap water to the 8 quart mark and put on the Anova which brough the water level to just a few inches above the MIN mark on the sleeve.  This is were I noticed something odd, when started the temperature display on the Anova started going up considerably faster than the Nomiku's had.  When I touched the power button to turn off the circulator the temperature reading dropped quickly.  A temperature probe confirmed that the reading on the Anova was high during the heating phase, but once the set point was reached the reading was spot on.  This only happened when the water level was near the MIN mark on the sleeve, when I filled the Cambro up to the 10 liter mark the temperature display on the circulator and on my probe thermometer stayed in sync.  As a final test I fulled up the Cambro with 10 liters of cold tap water (15.5C), attached the Anova Precision Cooker and set it for a 60C bath.  On an uncovered polycarbonate container it took 63 minutes to heat the bath up to the set point.  This is on par with other circulators I've used and is why we always want to start by filling our baths with hot tap water.  My first impressions of the Anova Precision Cooker is that it looks great, is quiet and easy to use.  I have not had a chance to play around with the Bluetooth connectivity since the Android app has not been released yet, I may have to dig up my old iPhone just so I can play around with the feature until an app for my phone is released.