Showing posts with label paragon induction cooktop. Show all posts
Showing posts with label paragon induction cooktop. Show all posts

Monday, February 15, 2016

Playing with the Paragon Induction Cooktop

Over the weekend I had finally some time to play around with my Paragon Induction Cooktop.  Before I could do that however, I needed to invest in some induction-ready cookware.  My T-fal professional skillet  is induction ready as well as my cast iron and carbon steel skillets, but none of my pots or saucepans would work with the new cooktop.  I went out looking for some suitable pots to use with the Paragon.

When I first became aware of the Paragon Indigogo campaign I thought it would be ideal to control the temperature during the mashing phase of homebrewing.  For this I needed an induction ready stockpot large enough to contain the mash, and because it would be exposed to acidic conditions it needed to have a stainless steel interior rather than aluminum.  The Tramontina 22 quart stockpot pictures to the left fits the bill nicely and at a low price to boot.  I also wanted a smaller saucepan to use for deep frying, soups and of course, sauces.  I ended up buying a 3 quart non-stick saucepan from Nuwave.  The Duralon non-stick coating is ceramic based and can withstand temperatures up to 475°f so it should have no problem with the temperatures needed for deep frying.  I plan on making some hush puppies later tonight so I'll get to see how it fares.

As a test I filled up the stockpot with around 14.5 liters of cold tap water to see how long it would to bring it up to 150°f.  Pairing the wireless probe to the cooktop is simple, just plug in the Paragon and push the button on the side to the probe battery case.  A Bluetooth symbol will flash three times and the probe will sync with the cooktop.  Once that is done you can select the rapid or gentle precise mode and set the desired temperature with the +/- buttons.  My understanding is that rapid mode will allow the maximum power level to go up to 10, while in gentle mode it is restricted to 5.  The starting temperature of the water was 50°f and in an uncovered pot is took 1 hour 10 minutes to reach 150°f (quick tip, the adhesive on the sticker started to loosen at around 110°f allowing it to be peeled off).  I did notice that the temperature consistently read 2°f higher using my Thermapen than what the wireless probe was showing, I'm not sure if there's a way to program in an offset but if not I'll just know to set the temperature 2°f lower than I want.  While I had the cooktop on I took the opportunity to sync it up to the FirstBuild app, I haven't had a chance to play around with it yet so I'm not sure what additional features it opens up but will try and do so this afternoon.




Wednesday, February 10, 2016

It's Here!: Paragon Precision Induction Cooktop Edition.

My latest gadget just arrived, the Paragon Induction Cooktop!  I haven't had a chance to play with it too much, probably won't be able to do so until the weekend, but wanted to post a few pics of the unboxing.


Here's the box as delivered.  A little damage on the corners and the box wasn't taped at all to prevent the box from being opened en route.

Here is the box opened to show all the gadgetry goodness!  The cooktop itself is a bit larger than I expected, the cooking surface is 12" across with an 18" diameter including the controls and feet.































Here is everything removed from the box.  The most interesting thing to me is the wireless probe shown in front.  When paired to the cooktop and attached to a pot of liquid it is supposed to allow you to control the temperature of the liquid in the pot to +/- 1°f up to 375°f.  My original thought when backing the campaign was that it would be very useful for home brewing beer, during the mash you need to bring the pot up to a precise temperature and hold it there while the enzymes in the malt convert starches to sugars.  This should make that job much easier.  Sous vide cooking it another cooking method that could be performed with this piece of equipment, but I'll probably stick with my Nomiku for that.  I can see myself using it for deep frying, I do have a dedicated fryer, but it requires 5 liters of oil and is a pain in the arse to clean up.  That's fine if I'm cooking for a crowd but not worth the trouble if it's just for two ot three.  The Paragon cooktop will allow me to use whatever size pot is most suitable for what I'm making.  This should also shine at low temperature poaching in whatever liquid I want to use be it court bouillon, olive oil or even butter!  I have the probe charging now and hope to put the Paragon Induction Cooktop through its paces soon!