Since I bought my Bradley Original Smoker last year I've wanted to take a stab at brisket, but there was no way I could possibly justify buying a whole brisket when it is just two of us doing the eating. The solution came when a nearby grocery store put brisket flats on sale. The smallest one I could find was a 3.5 pound untrimmed flat, which was more than enough for me to play with.
It was a dark and stormy day when I originally planned on smoking the brisket, and since rain and electric smokers aren't the best of buddies I had to throw the meat in the freezer and wait for my chance. That day came the next weekend, when it was dry out but much cooler.
I started out early in the morning, around 5:30 am. First thing was to set up the smoker and get it warming up. I had recently bought a resin horizontal shed for my Weber grill and smoker to live in, it works great and keeps everything dry but the tradeoff was that in arranging things so everything looked nice and tidy I made the outlet I usually use for the smoker inaccessible. No big deal, there's another outlet a few meters away. Unfortunately that outlet was dead so I had to run an extension cord to the other end of the patio. Now that the smoker had power I put a foil tray of water in the bottom to catch the fat rendering off the brisket and went to the kitchen to prep the meat.
I made a rub consisting of roughly equal parts kosher salt and ground black pepper, about a tablespoon and a half. To this was added 1/2 teaspoon granulated garlic, cayenne pepper and celery salt. I didn't really need to trim any of the fat cap off, so I just cut a cross hatch to help the fat render away during cooking. The rub was sprinkled evenly over all surfaced of the brisket. I temperature probe was inserted in to the meat from the side until it was roughly in the center.
At 6:15 am we were ready to go. Once everything was in place the temperature probe wire was threaded up through the smoke vents and attached to the thermometer. The second wire seen that can be seen in the photo is the thermocouple attached to my PID controller. I had the controller set to 250°f, but the tray of water I put in to catch falling grease really made it difficult for the smoker to reach temp. The highest temperature the chamber could reach while the water tray was in place was about 220°f. The alarm on the meat thermometer was set to 165°f and I went about my day, every few hours I would go out to check on things, add more bisquettes (I was using the Jim Beam smoking bisquettes for the most part) and make sure everything was working properly. With the tray of water keeping the temperature down it took almost 10 hours for the brisket to reach the target temp of 165°f. Now it was time to wrap.
I wrapped the brisket flat in parchment paper (for some reason you can't find plain butcher paper anymore, then wrapped everything up in aluminum foil. Since there was no longer a danger of melting fat dripping down and starting a fire I removed the tray of water at this time as well and emptied the bowl of used bisquettes. With the extra water out of the picture the smoker quickly reached the controller set point of 250°f and things moved quickly from there. In less than 2 hours the brisket flat had made it to the final temperature of 195°f, was removed from the smoker and put in a beer cooler to rest. 195°f as the final temperature was pulled from a recipe online, I had seen anywhere from a low of 195°f up to a high of 204°f and decided to go low thinking that carryover would take the temperature up at least a few degrees. I was wrong, because this was such a small piece of beef compared to a while brisket there wasn't much if any carryover. To bring it up a few more degrees I ended up putting the wrapped brisket in a 200°f oven while I went down to the patio and got everything broken down and stowed away in the shed.
Here's the final product, nice bark on the top but a little too salty. Next time I'll have to go lighter on the rub. The meat was moist and delicious, not quite as fall-apart tender as I would have liked but very good. Next time I'll take it to a higher temperature, possibly 200° or even a few degrees higher.
This turned out good, but I think I can make it great next time with a few minor tweaks. I prepared the leftovers for freezing by vacuum sealing them and putting them in a 150°f water bath for a few hours with my WiFi Nomiku maintaining the temperature. The packs were then chilled overnight before being thrown in the freezer. It'll be much easier reheating brisket from the freezer this winter than freezing my butt off trying smoke another one during a Chicago winter!
Showing posts with label brisket. Show all posts
Showing posts with label brisket. Show all posts
Friday, October 14, 2016
Wednesday, March 19, 2014
Sous Vide Corned Beef for St. Patrick's Day.
I've been having fun laying with my Nomiku immersion circulator, so I decided to put it to good use for our traditional St. Patrick's day meal. We usually cook the corned beef, the centerpiece of the meal, in the crockpot for about 10 hours. The result is very tasty, but leaves something to be desired in the texture. It is usually falling apart and kind of stringy by the time we get home, or if we cook at a lower temperature it may still be tough and dry. This year I decided to cook the corned beef sous vide.
There are several recommended time/temp combinations for corned beef on the internet, from 82C for 10 hours to 58C for 72 hours. I decided to cook ours for 48 hours at 64C, which fit the best in to my schedule. Because I had a rebate check for Costco we picked up a corned beef (Sy Ginsberg brand) there along with a second component of my plan...a case of guinness.
The first step was to make a guinnesscicle, I poured about 2/3 cup of Guinness in to a plastic container, added a tablespoon of corned beef spices I bought from The Spice House, sealed it up and put it in the freezer. The next day it was frozen solid and ready to use. I filed up my 12" x 18" x 9" polycarbonate box with hot water from the tap, the minimum and maximum levels are written in Sharpie on the box so I filled it to about an inch below the max level and attached my Nomiku. After touching the screen to turn it on I set the temperature to 64C and left it to heat up. Meanwhile I removed the corned beef from its packaging and rinsed off as much of the salty brine as possible. Because we would not be doing the traditional cooking method of simmering in lots of liquid I wanted to eliminate as much of the salt as possible. Once it was rinsed and patted dry I put the Guinnesscicle in a vacuum bag along with the corned beef and sealed it up. In the picture above you can see the still frozen Guinness in the bag. The bag was put in to the bath and the waiting began.
During the soak an unusual thing happened... the power went out. I say that it's unusual because this is only the second time in the 15 years we have been living in this house that I can remember a power outage. It happened on Sunday while we were all at home and only lasted about 10 minutes. I found it interesting because it showed off a controversial feature on the Nomiku that I had never tested, if the power goes out the Nomiku will remember the set point and resume once the power is restored. When this happens an icon lights up on the screen to alert you of the outage. I say it's controversial because it can be a food safety issue, if the power goes out while no one is around and stays out long enough for the bath temperature to drop in to the danger zone (between 4C and 49C) it could allow harmful bacteria to grow unchecked. If you don't notice the icon you could end up serving dangerous food. The way I see it is by resuming after a power outage and letting me know that there was one I get to decide if there is a risk, and take the appropriate actions. If the same outage had happened while we were all out at work and I was using a circulator that didn't resume afterwards then food that would have been otherwise fine would end up getting spoiled and thrown away. It would be REALLY nice if the Nomiku folks could add a feature that not only will tell you that there was an outage but also what the bath temperature was when the power was restored, that way you could make an informed decision. In the meantime I'm looking at buying a digital aquarium thermometer that has min/max capability like this one here.
Now on to St. Patrick's day. When I got home from work I pulled the corned beef out of the bag and allowed it to cool in the bag for about 10 minutes. During that time I quartered some new potatoes and sliced half a head of cabbage in to 1/2" thick slabs. A corner of the bag was cut off so I could pour off the juices (and there were a lot) through a strainer and in to a sauce pan. To those juices were added the potatoes and carrots with the cabbage lain on top. The lid was put on and the flame set to low, after about 15 minutes everything was cooked and we were ready to eat our St. Patrick's day meal with some soda bread and Guinness. The corned beef was excellent, tender but not falling apart with strong flavors and not too salty (thanks to the rinse). I don't have a picture, but for dessert I made an Irish Cream bread pudding served with some Guinness caramel. I'll post those recipes in a future entry. With the leftover half of cabbage I'm making some home fermented sauerkraut, we'll see how that goes in a week or so.
There are several recommended time/temp combinations for corned beef on the internet, from 82C for 10 hours to 58C for 72 hours. I decided to cook ours for 48 hours at 64C, which fit the best in to my schedule. Because I had a rebate check for Costco we picked up a corned beef (Sy Ginsberg brand) there along with a second component of my plan...a case of guinness.
![]() |
| Corned beef in water bath with frozen Guinness/spice puck still visible. |
![]() |
| Nomiku screen with "Power Outage" icon displayed. |
![]() |
| St. Patrick's Day dinner |
Labels:
brisket,
corned beef,
guinness,
irish,
nomiku,
power outage,
sous vide,
st. patrick
Subscribe to:
Posts (Atom)







